BREN Razor 700 Series User Manual

BREN 700-Series User Manual
Installation
2-2
2.2 Media Support System [for BREN 700-Series Razor]
Step 1
Please examine supplied items in the accessory box of stand carton:
 1 set of roll media flange (2 pieces)
 1 set of roll holder (2 pieces)
 2 pieces of base beams
 2 pieces of side beams
 1 piece of stand beam
 2 pieces of roll holder support
 20 pieces of M6 screws
 1 piece of M5 L-shape hexagon screw driver
 1 piece of installation guide for stand set
Step 2
 Remove the plotter body and the accessories from the shipped carton.
 Assemble the base beam to the side beam with 2 screws to form a T-shape stand.
(See Figure 2.2-1)
Figure 2.2-1

BREN Razor 700 Series Specifications

General

Brand	BREN
Model	Razor 700 Series
Category	Cutter
Language	English