BREN Razor 700 Series User Manual

BREN 700-Series User Manual
Installation
2-7
Step 10
Tighten the screw on the damper until it is securely attached to the right roll holder support
(Figure 2.2-11).
Step 11
Lastly, the complete picture will be shown like below. (Figure 2.2-12)
Step 12
Please refer to user manual section 4.1 to learn how to load the roll media.
Figure 2.2-12
Figure 2.2-11

BREN Razor 700 Series Specifications

General

Brand	BREN
Model	Razor 700 Series
Category	Cutter
Language	English