BREN Razor 700 Series User Manual

BREN 700-Series User Manual
Installation
2-6
Step 8
Turn the screw counter-clockwisely for around three times after unpacking roll holder 2
(Figure 2.2-9).
Step 9
Insert the end of the roll holder without the damper into the left roll holder support and then
insert the end of the roll holder with the damper into the right roll holder support. Ensure the
white protrusion is wedged in the groove (Figure 2.2-10).
Figure 2.2-10
Figure 2.2-9

BREN Razor 700 Series Specifications

General

Brand	BREN
Model	Razor 700 Series
Category	Cutter
Language	English