Breville Oracle - TEXTURING MILK; AUTO MILK TEXTURING

16
STEAM
SELECTSELECTSELECT
TEMP TEXTURETEMP TEXTURETEMP TEXTURE
Different brands and types of milk and milk
alternatives will texture differently. You may
need to adjust the texture level accordingly.
NOTE
Prior to texturing milk, always purge steam
wand by momentarily pressing down the
steam lever.
AUTO MILK TEXTURING
Start with fresh cold milk. Fill milk jug to
below the spout position. Lift steam wand
and insert into milk jug. Lower steam wand,
ensuring it is fully down. The milk jug should
rest on the drip tray and milk should cover the
steam wand seal.
MIN
MAX
MILK MUST
COVER THIS
SEAL
To start, press down and release steam
lever. The LCD will display the temperature
of the milk as it heats. Milk texturing will
stop automatically when the selected milk
temperature is reached. Lift steam wand to
remove milk jug. Wipe the wand & tip with a
damp cloth. Lower steam wand to the down
position and the wand will automatically purge.
MANUAL MILK TEXTURING
Auto milk texturing and auto shut-off are
disabled during manual milk texturing mode.
Insert steam wand into milk jug. Lift steam
lever to activate manual steam mode. Once
the desired milk texture and temperature are
achieved, lower the steam lever to the center
OFF position. Wipe the wand & tip with a
damp cloth. Lower steam wand to the down
position and the wand will automatically purge.
CAUTION: BURN HAZARD
Pressurized steam can still be released, even
after machine has been switched off.
Children must always be supervised.