21
TAMP SET
This function is for advanced use only.
Adjusting tamp parameters allows for fine
tuning of coffee tamping force & polishing
duration. While 'TAMP SET' is displayed on
the LCD, press the SELECT dial. The tamp
force setting will flash. Turn SELECT dial to
setting 1–9.
SELECTSELECTSELECT
TEMP TEXTURETEMP TEXTURETEMP TEXTURE
SELECTSELECTSELECT
TEMP TEXTURETEMP TEXTURETEMP TEXTURE
Press SELECT dial to set and the current
polishing time will flash. Turn SELECT dial to
select 2–10 seconds. Press SELECT dial to set.
Machine will beep once to confirm settings.
SELECTSELECTSELECT
TEMP TEXTURETEMP TEXTURETEMP TEXTURE
SELECTSELECTSELECT
TEMP TEXTURETEMP TEXTURETEMP TEXTURE
PRE-INFUSION
This function is for advanced use only.
Low pressure pre-infusion allows you to control
the pressure & duration of the pre-infusion
phase of the espresso extraction. While 'PRE
INFUSE' is displayed on the LCD, press the
SELECT dial. The pump power setting will
flash. Turn SELECT dial to increase or decrease
the pre-infusion pressure. Press SELECT dial
to set and pre-infusion duration will flash.
Turn SELECT dial to adjust seconds. Press
SELECT dial to set. Machine will beep once to
confirm settings.
SELECTSELECTSELECT
TEMP TEXTURETEMP TEXTURETEMP TEXTURE
SELECTSELECTSELECT
TEMP TEXTURETEMP TEXTURETEMP TEXTURE
AMERICANO ADJUST -
PROGRAMMING CUSTOM SETTINGS
There are 6 custom Americano settings for you
to program to suit your cup size and strength
preferences. To program your custom setting:
1. Fill the portafilter using the auto grind, dose
& tamp function.
2. Insert the portafilter into the group head.
3. Position your cup so the portafilter
spouts and hot water outlet are directed
inside the cup.
4. Press the MENU button. Rotate the
SELECT dial to ‘AMERICANO ADJUST’
then press the SELECT dial.
To Next Page
Loading...
