FRONT
quick start
Initial Cleaning
*It is important to clean the product before
using for the first time and after each use.
step 1: fill with water step 2: turn on
If the water tank
is empty fill with
300ml of water,
making sure the
cap is tightly
closed.
Plug in and
switch on.
The orange
Power On light
will illuminate
followed by
the green light
when ready
to use.
step 3: flush with water step 4: clean
Fill the milk
tank with water.
Place the
Cleaning jug on
the drip tray.
CLEAN
WATER
It is important
to do this the
first time and
after each use
CLEAN GO!
STOP
Turn the dial
anti-clockwise to
CLEAN/GO.
When all the
water has flushed
through the Instant
Cappuccino, turn
the dial to STOP.
Instant Cappuccino is now ready
to use. Please follow the making
a cappuccino instructions on the
reverse of this card...
Milk and instant
coffee granules
left in the machine
will damage
the internal
mechanism.
!
IMPORTANT!
Always follow the
cleaning instructions
To Next Page
General
