3
SPECIFICATIONS AND REQUIREMENTS
BEC-110 SPECIFICATIONS:
Read and follow instructions carefully before installing your BREW EXPRESS in-the-wall
COFFEE SYSTEM. For best results, it is advised that you hire a qualified professional.
1. Overall Dimensions 12 1/4” X 13 1/2” X 7 3/4” (see below).
2. Electrical Requirements 120VAC, 60HZ. (1400 watts).
3. Water Requirements 1/4” OD water supply line (copper or poly) 30 psi to 90 psi. Potable COLD water is required.
NOTE: If water is not available, a 5 gallon dispensing jug can be used with a pump (not supplied).
Contact Brew Express for more information.
Please Note: A filter and shut off valve at water source is recommended. The filter, such as an ice maker type filter,
can easily be installed at the source. If water lines are not purged or clear of debris or a filter is NOT installed, foreign
particles (debris) in water may clog brewer system causing failure, and will void all warranties.
To Next Page
Loading...