5
SET UP
IMPORTANT:
Read and follow instructions carefully before installing your BREW EXPRESS COFFEE SYSTEM.
1. Unpack Product
Carefully remove Brew Express from packaging.
Remove hardware kit from inside brew basket.
2. Select Location
Find a location with close proximity to a power outlet and water supply.
3. Connect water line to water source.
Water source options are typically the cold water tap under the sink or the water line connecting the
refrigerator ice maker.
NOTE – shut off water sources before removing or alternating existing lines.
!
!
water line to sink
¼” poly water line
to coffee maker
cold water
valve
angle stop
valve
adaptor
Option 1: Cold Water Tap
water line
to ice maker
¼” poly water line
to coffee maker
Option 2: Ice Maker Line
cold water line
!
!
• connection to water supply (supplied)
• remove water line from valve to facet
• add valve
• reconnect facet line to tee hardware
• connect new ¼” poly line to valve connection
• Valve connection included
• cut existing line
• add valve
• connect new ¼” poly line to tee
To Next Page
Loading...