EasyManua.ls Logo

Brewolution BREWSTER BEACON 40 - User Manual

Brewolution BREWSTER BEACON 40
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
1
INSTRUCTION MANUAL FOR
BREWSTER BEACON 40
MODEL NO.: BB-A400M-1
Instruction manual - English page 2-8
Brugsanvisning - Dansk side 9-16
Bedienungsanleitung - Deutsch seite 17-24
Congratulations on your new Brewster Beacon All-In-One Brew System.
Please follow the instructions in this manual to get the best from your machine. The processes
described are general guides, as we fully understand that brew recipes and conditions vary. The
machine has been designed for you to adjust the settings to suit your own brewing requirements.
That is why we believe you will appreciate the programming functions of up to 9 mashing steps and
up to 9 hop steps and the fact that you can store up to 10 different recipe settings.
Besides this manual please also scan the QR code or go to www.brewolution.com for tutorials
Cheers to Craft Brewing.

Questions and Answers

  • J
    jennifergrahamAug 11, 2025
    Why is ERR-1 shown on my Brewolution BREWSTER BEACON 40 display?
    • L
      Luke HahnAug 11, 2025
      If your Brewolution Brewing System displays 'ERR-1', this indicates a low temperature warning, because the temperature is lower than -20?. It can also mean that the sensor connector is loose. To resolve this, open the underneath and check the sensor. Re-connect it if loose.
  • K
    Kenneth CookAug 18, 2025
    What to do if my Brewolution Brewing Systems suddenly shut off during heating?
    • C
      ccaldwellAug 18, 2025
      If your Brewolution Brewing System suddenly shuts off during heating, you can try the following: * Lower the heat up power. * Replace the overheat protection fuse.
  • Z
    zyatesAug 23, 2025
    How to fix Brewolution BREWSTER BEACON 40 failing to reach 100?
    • R
      robert97Aug 23, 2025
      If your Brewolution Brewing System isn't reaching 100?, try putting the lid on for 1 to 2 minutes. You can also make a temperature correction.
  • M
    Michael MoraAug 29, 2025
    How to do a C1 degree centigrade temperature correction on Brewolution BREWSTER BEACON 40 Brewing Systems?
    • R
      randyloweAug 29, 2025
      To perform a degree centigrade temperature correction on your Brewolution Brewing System, press '-' and '+' at the same time to enter the C1 temperature correction setting. The setting range is from -10? to +10?. Press the TEMP button to confirm.
  • D
    Daniel CollinsSep 4, 2025
    What to do if ingredients stuck in the pump of Brewolution Brewing Systems?
    • D
      Deborah HowardSep 4, 2025
      If ingredients get stuck in the pump of your Brewolution Brewing System, you can try flushing the pump by connecting a hose to the curved pipe. If that doesn't work, dismantle the pump to remove the ingredients.

Brewolution BREWSTER BEACON 40 Specifications

General IconGeneral
BrandBrewolution
ModelBREWSTER BEACON 40
CategoryBrewing Systems
LanguageEnglish