DECLARATION OF CONFORMITY
Slicer
Machine Model:
Serial Number:
Dated:
is built in conformity with the provisions of:
98/37/CEE
Machinery Directive
EN 1974
Food processing machinery
- Slicing machines
- Safety and hygiene requirements.
EN 60204
Electrical equipment of industrial machines:
Part 1 - General Design
89/109/CEE
Directive for the materials and things destined
to come into contact with food.
89/336/CEE
Directive on Electromagnetic Compatibility
(EMC)
73/23/EEC
Directive on low voltage.
SAFETY ISSUES
1. NEVER touch this machine without training and
authorisation from your supervisor.
2. Machine MUST BE on solid, level bench/table.
3. Guards MUST BE in place before plugging in and turning
on machine.
4. ALWAYS use the three-pronged plug provided.
5.
NEVER use your hand to hold food stuffs in place on the
meat table.
6.
NEVER touch the slicer blade when it is rotating.
7.
KEEP hands, arms, hair and loose clothing CLEAR
of all moving parts.
8. Should the slicer jam, SWITCH OFF AND UNPLUG before
removing the obstruction.
9. SWITCH OFF AND UNPLUG the machine from its power
source before cleaning, sanitizing or servicing.
10. USE ONLY the attachments provided by the manufacturer
and designed for this machine.
YOUR SAFETY IS OUR PRIMARY CONCERN
To Next Page
Loading...