To Next PageTo Next PageWhat to do if the Briggs & Stratton 01813-0 does not transfer to the generator?
If the Briggs & Stratton Switch does not transfer to the generator, first reset the generator circuit breaker. If that doesn't work, the generator voltage may not be acceptable, so refer to the generator manual for further instructions.
What to do if the Briggs & Stratton 01813-0 Switch does not transfer to utility?
If the Briggs & Stratton Switch does not transfer to utility power, begin by resetting the service disconnect breaker. If the issue persists, it may be due to unacceptable utility voltage; in this case, wait for the utility voltage to return to normal.
Why is the Briggs & Stratton generator still running after switch transfers to utility power?
The generator might still be running after the Briggs & Stratton Switch transfers to utility power because of the engine cool-down period. The engine should stop after 1 minute.
General| Brand | Briggs & Stratton |
|---|---|
| Model | 01813-0 |
| Category | Switch |
| Language | English |
Alerts to potential personal injury hazards from electrical shock, including warnings about water, wet conditions, and unqualified persons.
Cautionary advice on preventing equipment damage and ensuring safe operation, including avoiding moisture, dust, and fatigue.
Guidance for home or business owners to understand the transfer switch and communicate effectively with installers.
Information for installing professionals, including checking codes, contacting the factory, and owner orientation.
Details on the automatic transfer switch components, including its purpose and major parts like the control board and interlock switches.
Instructions for inspecting the transfer switch upon delivery and confirming shipment contents for any damage or loss.
Guidelines for mounting the enclosure, dimensions, and essential power wiring interconnections for proper installation.
Steps and sequence for automatic transfer, including utility fail, engine warm-up, transfer, utility pickup, retransfer, and cool down.
Instructions on how to test the automatic transfer switch by manipulating the service disconnect switch.
Technical details for Model 01813 and 01814 transfer switches, including load ratings, voltage, frequency, and weight.
Identifies common problems with the transfer switch, their causes, and recommended corrective actions.
Provides electrical schematic and wiring diagrams for the transfer switch, illustrating connections and components.
Detailed exploded views and corresponding parts lists for Models 01813 and 01814 for identification and replacement.
Outlines the terms and conditions of the limited warranty for Briggs & Stratton Power Products, including coverage periods.
Details items and conditions not covered by the warranty, such as misuse, improper installation, and normal wear.
