EasyManuals Logo

Briggs & Stratton 135202 User Manual

Briggs & Stratton 135202
14 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
SERVICE ENGINE
MODEL 135200 SERIES ENGINES REPLACED WITH
STANDARD SERVICE ENGINES
FORM MS-2896-7/04
REPLACES FORM MS-2896-8/02
FILE IN SECT. 2B OF SERVICE ENGINE SALES MANUAL
135200 to 135299
In most cases, the Original Type numbers shown may be replaced by a Service Type Number without making any changes. Necessary changes of engine parts
such as crankshafts, reduction parts, blower housings, etc., are noted. Other differences, such as mufflers, elbows, deflectors, etc., are not listed but are very
important for safety and engine performance. Be sure the exhaust system on the replacement engine duplicates the system originally selected by the equipment
manufacturer. Parts that are suitable for additional use should be transferred. Before making any conversion, check the data shown in the column labeled
"REMOVE, ADD and NOTE." See if the changes, which are shown, are actually necessary on the application in question. Often a standard service engine
will be a WORKABLE replacement without converting to such things as a special fuel tank or starter position.
The SHORT BLOCK part number shown, is the assembly which can be used to rebuild the Original Type Number. If a letter appears after the short block number,
it indicates the short block must be modified. The change denoted by each letter is as follows:
If the crankshaft number does not appear in the "Original Engine" column, consult the Illustrated Parts List for the correct service replacement crankshaft number.
SALES MANUAL
Engine Replacement Notes:
Short Block Notes:
NOTE R: Cut off 1-7/16" on Flywheel end of Crankshaft.
NOTE 6: Drill and Retap end of Crankshaft 7/16"-20 (1" Deep). Use 25/64" Tap Drill.
NOTE 15: For all Go-Karts use only a Model 136200 series engine as a replacement, regarless of the original Model.
NOTE 17: Gear Red. @ 3 o'clock.
NOTE 25: If the replacement engine supersedes to or is a Model 120000 series engine, refer to the illustrations located after the conversion data for this model series.
the overall dimensions that differ, are shown in the illustrations. If after making a visual inspection and it is determined the Model 120000 series engine
cannot be used because of equipment interference, the original engine should be repaired with individual parts.
NOTE 104:
Transfer the Gear Reduction parts to the replacement engine.
NOTE 113:
Gear Red. @ 6 o'clock.
Type Model Model
Trim RPM
Remove
Note
Change
to Type
Original Engine
Type #
Make From
Crank
Add Short Block
NotesPart #
Qty Part # Qty Part #
135200 to 135299
0001 135202 492088 No Replacement Repair With Individual Parts. 15 01 3600
0003 135202 495649 No Replacement Repair With Individual Parts. 15 All 4000
0004 135202 492088 126332 0036 15
25
01 3200
0005 135202 492088 126332 0036 15
25
All 3600
0006 135212 492088 694200No Replacement Repair With Individual Parts. 15 All 3600
0007 135212 495649 126312 0060 15
25
01 4000
0008 135232 495645 126332 0036 15
25
01 4000
0009 135232 495645 126332 0036 15
25
01 4000
0011 135297 492088 No Replacement Repair With Individual Parts. 15 01 3600
0012 135212 492088 126312 0023 69420015
25
01 3750
0013 135217 492088 694200No Replacement Repair With Individual Parts. 15 01 3600
0014 135212 497276 694200No Replacement Repair With Individual Parts. 15 All 3600
0015 135202 492088 126332 0036 15
25
01 3600
0016 135202 492088 126332 0036 15
25
01 3500
0017 135232 495645 126332 0036 15
25
01 4000
0018 135232 495645 126332 0036 15
25
01 3000
Page 1 of 13
For Briggs & Stratton Discount Parts Call 606-678-9623 or 606-561-4983
www.mymowerparts.com

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Briggs & Stratton 135202 and is the answer not in the manual?

Briggs & Stratton 135202 Specifications

General IconGeneral
BrandBriggs & Stratton
Model135202
CategoryEngine
LanguageEnglish

Related product manuals