Need help?Do you have a question about the Briggs & Stratton 13U200 and is the answer not in the manual?
General| Cylinder | Single |
|---|---|
| Cooling System | Air-cooled |
| Oil Capacity | 20 oz (0.6 L) |
| Ignition System | Magnetron electronic ignition |
| Governor Type | Mechanical |
| Carburetor | Float feed |
| Lubrication System | Splash |
| Fuel Type | Unleaded gasoline |
| Engine Type | 4-stroke |
| Displacement | 205 cc |
| Spark Plug Gap | 0.030 in (0.76 mm) |
| Oil Type | SAE 30 |
Details on safety alert symbols, signal words, and hazard meanings.
Procedures for checking and changing engine oil levels.
Instructions for cleaning and replacing various air filter types.
Systematic checks for ignition, carburetion, and compression problems.
Diagnosing ignition system faults for engine starting and running.
Troubleshooting steps for fuel mixture and carburetor issues.
Step-by-step guide for disassembling the engine's top end.
Procedures for disassembling the engine's bottom end.
Service procedures for the cylinder head, valves, and guides.
Disassembly, cleaning, inspection, and assembly of piston and rod.
Service procedures for flywheel, crankshaft, and camshaft components.
Service and inspection of the crankcase and cover components.
Steps for assembling the engine's bottom end components.
Procedures for reassembling the engine's top end.
To Next Page