Briggs & Stratton 252700 Series User Manual

COPYRIGHT by BRIGGS & STRATTON CORPORATION
All rights reserved. No part of this material may be reproduced or transmitted,
in any form or by any means, electronic or mechanical, including photocopying,
recording or by any information storage and retrieval system, without permission
in writing from Briggs & Stratton Corporation.
FORM MS–6929–6/2002
REPLACES FORM MS–6929–9/92
FILE IN SECT. 2 OF SERVICE MANUAL
252700 to 252799
Illustrated Parts List
Model Series
252700 to 252799
TYPE NUMBERS
0016 through 0028,
0111 through 0247,
0515 through 0560,
0611,
0616 through 0622,
0624, 0625,
0630 through 0719.
TO FIND
THE CORRECT NUMBER OF THE PART YOU NEED:
FOLLOW THE INSTRUCTIONS BELOW
A. Refer to Engine Model, Type and Code Number that is stamped on the blower housing of engine.
Engine type numbers such as 0123 01 are listed only as 0123 in most instances. The two digits (01
or 02, etc.) to the right of the space may be required for more accurate parts identification in some
instances. Select the Illustrated Parts List covering the correct Model Series and Type Number.
B. Refer to the Illustrations and compare the original part with Illustration. The number next to the
illustration is the Reference Number. Assemblies include all parts shown in frames. All parts shown
in assembly frames having individual reference numbers can be purchased separately.
C. After the Reference Number has been identified, refer to the Numerical text, where Reference and
Primary Part Number are listed. THE PRIMARY PART IS USED ON ALL TYPE NUMBERS
EXCEPT THOSE TYPE NUMBERS UNDER “NOTE.”
D. If a “Note” appears below the Primary Part Number, it means that this part differs from the Primary
Part for certain types. If your Type number is listed under “Note,” order the part referred to at the
“Note.”
E. If your Engine Type Number does not appear after any part number listed under “Note,” use the
Primary Part Number.
F. For Engine Type Numbers not covered by this book, check other Parts Lists having the same
engine model or contact your source of supply.
PRINTED IN U.S.A.

Briggs & Stratton 252700 Series Specifications

General

Brand	Briggs & Stratton
Model	252700 Series
Category	Engine
Language	English

Summary

Parts List Usage Instructions

How to Identify Parts

Guides on using engine model, type, and code numbers for accurate part identification.

Engine Core Parts

Cylinder Assembly

Lists parts for the engine's cylinder and related components.

Crankshaft Assembly

Details parts for the crankshaft, connecting rod, and associated components.

Piston & Rings

Provides part numbers for pistons, piston rings, and pins.

Valves & Springs

Lists components for engine valves, including seats, springs, and retainers.

Sump & Oil System

Includes parts for the engine oil sump, crankcase gaskets, and dipstick assembly.

Fuel & Air Systems

Carburetor Assembly

Lists all parts for the carburetor, including jets, floats, and linkages.

Air Cleaner Assembly

Details components for the air cleaner system, such as filters and covers.

Fuel Filter & Pump

Provides part numbers for fuel filters, fuel lines, and fuel pump components.

Fuel Tank & Cap

Lists parts for the fuel tank, including caps and mounting straps.

Control & Governor Systems

Governor & Choke Linkage

Details parts for the engine's governor mechanism and choke controls.

Governor Springs

Lists various governor springs used across different type numbers.

Exhaust System

Muffler & Exhaust Pipe

Lists parts for the exhaust muffler and associated pipes and heat shields.

Starting & Electrical Systems

Flywheel & Starter Drive

Includes parts for the flywheel, starter drive, and related housing.

Magneto & Alternator

Details parts for the magneto ignition system and alternator components.

Starter Motor Assembly

Lists components for the starter motor, including armature, drive, and housing.

Service & Maintenance Kits

Gasket & Carburetor Kits

Details available gasket sets and the carburetor overhaul kit.