Page 12 of 13
FASTENER TORQUE SPECIFICATIONS
Fastener Torque Specs
SAE Metric
Air Cleaner Base to Carburetor 40 lb-in 4.5 Nm
Air Cleaner Base to Control Bracket 50 lb-in 5.6 Nm
Alternator/Stator 95 lb-in 10.7 Nm
Armature 95 lb-in 10.7 Nm
Blower Housing 85 lb-in 9.6 Nm
Carburetor Stud to Cylinder Head 60 lb-in 6.8 Nm
Connecting Rod 125 lb-in 14.1 Nm
Control Bracket 95 lb-in 10.7 Nm
Crankcase Cover 220 lb-in 24.9 Nm
Cylinder Head 210 lb-in 23.7 Nm
Cylinder Head Plate Studs 125 lb-in 14.1 Nm
Cylinder Shield 50 lb-in 5.6 Nm
Exhaust Stud to Cylinder Head 50 lb-in 5.6 Nm
Exhaust Muffler 95 lb-in 10.7 Nm
Exhaust Muffler Guard 40 lb-in 4.5 Nm
Exhaust Muffler Deflector (Plate-style) 30 lb-in 3.4 Nm
Exhaust Muffler Deflector (Tube-style) 10 lb-in 1.1 Nm
Flywheel Finger Guard 85 lb-in 9.6 Nm
Flywheel Nut 65 lb-ft 88.1 Nm
Fuel Tank Screw 85 lb-in 9.6 Nm
Fuel Tank Nuts 100 lb-in 11.3 Nm
Governor Lever Nut 40 lb-in 4.5 Nm
Oil Drain Plug 170 lb-in 19.2 Nm
Oil Fill Tube to Crankcase Cover 30 lb-in 3.4 Nm
Oil Fill Tube to Trim Panel 10 lb-in 1.1 Nm
Oil Module (External) 55 lb-in 6.2 Nm
Oil Sensor (Internal) 60 lb-in 6.8 Nm
Oil Sensor Harness Nut 40 lb-in 4.5 Nm
Rewind Starter 30 lb-in 3.4 Nm
Rocker Ball Nuts 70 lb-in 7.9 Nm
Sparkplug 180 lb-in 20.3 Nm
Valve Cover 80 lb-in 9.0 Nm
To Next Page
Loading...
