EasyManuals Logo

Briggs & Stratton 950 Series User Manual

Briggs & Stratton 950 Series
13 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Not for Reproduction
Copyright © Briggs & Stratton Corporation Page 1 of 13
All language translations of this document are
derived from the original English source file.
ADVANCE PRODUCT SERVICE INFORMATION
APSI NO: 101
DATE: AUGUST 2014
SUBJECT: 950 SERIES™ UTILITY ENGINE
MODELS: 130G00 OHV HORIZONTAL SHAFT
This APSI provides basic servicing information in advance of the repair manual under development. Systems
testing, troubleshooting, and component removal and installation procedures are common with most other
single-cylinder horizontal-shaft OHV engines. See the Illustrated Parts List for service part numbers. The
specifications, part numbers, and procedures provided here are preliminary and subject to change.
MODEL IDENTIFICATION LOCATION
The Model-Type-Trim and Code numbers (A) are printed or etched into the edge of the cylinder base below
the fuel tank. The bar code serial number label (B) is attached to the side of the fuel tank.
A
B

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Briggs & Stratton 950 Series and is the answer not in the manual?

Briggs & Stratton 950 Series Specifications

General IconGeneral
Fuel TypeGasoline
Starting SystemRecoil
Torque9.50 ft-lbs
Fuel Tank Capacity0.95 qt
Oil Capacity20 oz (0.6 L)
Engine Type4-cycle OHV
Bore x Stroke2.75 x 2.13 inches

Related product manuals