To Next Page
G
Gina CabreraJul 26, 2025
What to do if my Briggs & Stratton Diamond Pressure Washer engine will not start?
- SStephanie NelsonJul 26, 2025
If your Briggs & Stratton Pressure Washer engine won't start or runs rough, check the following: * Ensure the oil level is correct by filling the crankcase. * Clean or replace the air cleaner if it's dirty. * Fill the fuel tank if it's empty or drain and refill with fresh fuel if the fuel is stale or contains water. * Connect the spark plug wire, or replace the spark plug if it's bad. If the issue persists, it may be due to an excessively rich fuel mixture, and you should contact a local service facility.
General
