To Next PageTo Next Page
Need help?Do you have a question about the Briggs & Stratton Elite 01802, 01804 and is the answer not in the manual?
General| Brand | Briggs & Stratton |
|---|---|
| Model | Elite 01802, 01804 |
| Category | Pressure Washer |
| Language | English |
Explains the safety alert symbol and signal words (DANGER, WARNING, CAUTION) used in the manual.
Covers critical hazards like engine exhaust, carbon monoxide, electrical shock, and slippery surfaces.
Details safe practices for handling, refueling, and storing fuel to prevent fire and explosion.
Warns about entanglement with moving parts, sparking, and electrical shock risks.
Addresses risks from high-pressure spray, operating speeds, and hot engine components.
Warns about damage to fragile items and flying debris from high-pressure spray.
Instructions for safely removing the pressure washer and its accessories from the shipping carton.
Steps required before operation, including registration, attaching parts, and adding fluids.
Step-by-step guide for securely attaching the handle assembly to the main unit.
Important instructions on checking and adding the correct engine oil before operation.
Details on attaching the high pressure hose to the spray gun and pump securely.
Instructions for inspecting the water inlet screen and connecting the garden hose.
A checklist of essential steps and checks before starting the pressure washer engine.
Step-by-step instructions for starting the pressure washer for the first time or after idle periods.
Procedure for safely shutting down the pressure washer and relieving system pressure.
Guide on how to adjust the nozzle for low or high pressure and narrow or fan spray patterns.
Steps for applying detergent using the adjustable nozzle, including using appropriate soaps.
Instructions on how to apply detergent effectively and allow it to soak before rinsing.
Procedure for rinsing the cleaned area using high pressure, with safety precautions.
Explanation of the thermal relief system that protects the pump from overheating.
Overview of essential maintenance tasks to ensure proper operation and warranty coverage.
Routine checks to perform before operating the pressure washer, including oil and hose inspection.
Guidelines for inspecting and replacing the high-pressure hose to prevent leaks and damage.
Steps to remove air and contaminants from the pump system for optimal performance.
Instructions for detaching and cleaning the in-line filter screen to prevent pressure issues.
Procedure for cleaning a clogged nozzle orifice to resolve pulsing sensations and restore pressure.
Guidance on inspecting and replacing O-rings to ensure tight, leak-free hose connections.
Instructions for flushing the chemical injection hose with clean water after use.
Detailed steps for draining and refilling the pump oil for regular maintenance.
References the engine owner's manual for specific engine maintenance procedures and cautions.
Steps to prepare the unit for long-term storage, including flushing and fluid replacement.
Instructions on using PumpSaver or antifreeze to prevent freeze damage to the pump.
Directs users to the engine owner's manual for proper engine storage instructions.
Addresses common pump issues like low pressure, chattering, and low water volume.
Solutions for when detergent fails to mix correctly with the spray.
Troubleshooting for engine bogging down when load is applied.
Identifies running out of gasoline as a cause for the unit stopping during operation.
Details the terms and conditions for repair or replacement of defective parts.
Outlines the warranty duration for consumer and commercial use of the pressure washer.
Lists conditions and parts not covered by the warranty, such as misuse or normal wear.
