To Next PageTo Next Page
Need help?Do you have a question about the Briggs & Stratton CleanShot 020244-0 and is the answer not in the manual?
General| Brand | Briggs & Stratton |
|---|---|
| Model | CleanShot 020244-0 |
| Category | Pressure Washer |
| Language | English |
Explains the meaning of safety alert symbols and signal words used in the manual.
Covers hazards related to fuel, operation, transport, storage, and exhaust gases.
Details the dangers of high-pressure water streams piercing skin and causing injury.
Warns about the risk of injury from rapid starter cord retraction (kickback).
Addresses risks from hot engine parts and combustible debris catching fire.
Warns about entanglement risks with starter and other rotating parts.
Highlights the danger of paint chips or particles becoming airborne.
Warns about unintentional sparking leading to fire or electric shock.
Provides safety guidelines for performing repairs and adjustments on the unit.
Identifies and explains the function of key pressure washer components.
Instructions for safely removing the pressure washer from its carton.
Key steps to prepare the pressure washer before initial operation.
Step-by-step guide for attaching the handle assembly to the main unit.
Crucial steps for filling the engine with oil and fuel before starting.
Instructions for connecting the high pressure hose and garden hose.
Ensures all necessary checks are completed before starting the engine.
Guidelines for safely positioning the pressure washer for operation.
Step-by-step instructions for starting the pressure washer engine.
Procedure for safely shutting down the pressure washer engine.
Instructions on how to adjust the nozzle for spray pattern and pressure.
Steps for applying detergent using the chemical injection system.
Instructions for rinsing surfaces after washing and applying detergent.
Procedure for flushing the detergent system after use.
Explains the function of the thermal relief system for the pump.
Essential checks to perform before every operation of the pressure washer.
Instructions for checking and cleaning the water inlet screen.
Guidance on inspecting the high pressure hose for wear and damage.
Procedure for checking the detergent siphoning tube for damage or clogs.
Inspects the spray gun and nozzle extension for secure connections and function.
Details on how to check and clean the in-line filter.
Troubleshooting and cleaning for nozzle clogs causing pressure issues.
Information on maintaining and replacing O-rings using a specific kit.
Instructions for changing the pump oil.
Advises referring to the engine owner's manual for engine maintenance.
Steps to protect the pump from mineral deposits and freezing damage.
Diagnoses and solutions for issues like low pressure or erratic operation.
Troubleshooting steps when detergent fails to mix with the spray.
Addresses problems like the engine bogging down under load.
Troubleshooting for when the unit unexpectedly stops working.
Details the terms and conditions of the limited warranty coverage.
Outlines the warranty duration for consumer and commercial use.
Explains warranty exclusions and conditions for repair service.
