What to do if my Briggs & Stratton Portable Generator engine will not start?
If your Briggs & Stratton Portable Generator engine won't start, it could be due to several reasons: * A missing or blown 15 Amp fuse. Install a new 15 Amp fuse. * The fuel supply being turned off or depleted. Open the fuel valve(s) and check the propane tank. * A failed battery. Replace the battery.
What to do if my Briggs & Stratton Home Generator has no AC output?
If your Briggs & Stratton Portable Generator's engine is running but there's no AC output, the issue might stem from: * An open or defective circuit breaker. Try resetting or replacing the circuit breaker. * A fault in the generator itself. Contact a local service facility for assistance. * Poor wiring connections or a defective transfer switch. Check and repair the wiring.
Why does my Briggs & Stratton Portable Generator bog down when a load is connected?
Your Briggs & Stratton Portable Generator may bog down when loads are connected due to: * A short circuit in a connected load. Disconnect the shorted electrical load. * The generator being overloaded. * A shorted generator circuit. In this case contact a local service facility. * Incorrect fuel pressure. * An incorrect natural gas fuel mixture. * A kinked fuel line between the regulator and the engine. Remove the kink in the fuel line, and replace the line if necessary.
General| Brand | Briggs & Stratton |
|---|---|
| Model | Home Generator |
| Category | Portable Generator |
| Language | English |
To Next Page
