To Next PageTo Next PageWhy is the control panel LCD flashing on my Briggs & Stratton Portable Generator?
If the control panel LCD on your Briggs & Stratton Portable Generator is flashing, it's likely a maintenance reminder. Perform the scheduled maintenance and then push and hold the 'View' button for a minimum of 3 seconds to reset the reminder.
General| Starting Watts | 3000W |
|---|---|
| Engine Displacement | 171cc |
| Fuel Tank Capacity | 1.5 gallons |
| Weight | 84 lbs |
| Engine Type | 4-Stroke OHV |
| THD | <3% |
| Running Watts | 2600W |
| Noise Level | 58 dB |
| Outlets | One 12V DC Outlet, One USB Port |
Detailed warnings covering hazards like carbon monoxide, battery risks, kickback, and fuel.
Instructions for adding engine oil to the generator before initial use.
Step-by-step instructions for starting the generator engine safely.
Procedure for safely connecting electrical loads to the generator.
Procedure for safely shutting down the generator engine.
Steps for checking, adding, and changing the engine oil.
Diagnosing and correcting problems like no AC output or engine bogging down.
Troubleshooting steps for engine not starting, shutting down, or running rough.
