EasyManua.ls Logo

Briggs & Stratton Quantum 120000 Series - Starting and Stopping Engine; Manual Starter Operation; Engine Stopping Procedure

Briggs & Stratton Quantum 120000 Series
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Document: - page 9 (Black)
Screen angle and frequency: 45.0000, 150.0000
9
STARTING AND STOPPING
REWIND (MANUAL) STARTER
TO START ENGINE
[1] Check oil level (see p. 7).
[2] Open fuel shut-off valve
(if equipped) 1/4 turn.
[3] Move throttle (if equipped) to FAST.
Operate engine with throttle in FAST.
[4] Push stop switch (if equipped) to ON.
[5] Firmly push primer bulb 3
times OR move choke
control lever to CHOKE
position.
Primer Choke
[6] Close safety brake
handle on lawn mowers
and any other equipment
with this feature.
[7] Grasp rope handle. Pull slowly until
resistance is felt, then pull rapidly to
start engine and avoid kickback.
[8] Allow engine to
warm up.
If choke
equipped:
Slowly adjust to-
ward RUN posi-
tion. Wait until
engine runs
smoothly before
each choke ad-
justment.
WARNING
TO STOP ENGINE
CAUTION: Do not stop engine by moving choke
control to CHOKE. Backfire, fire or engine damage
could occur.
[1] Move throttle (if equipped) to
SLOW, then release safety
brake control handle.
[2] Move throttle (if equipped)
to SLOW, then to STOP.
OR
[3] Push stop switch (if equipped) to OFF.
[4] Close fuel shut-off valve (if
equipped).

Related product manuals