Revised May 2012
18
5.3 Accessories and Consumables
Part Number Description
/R Conveyor for section ribbon.
50539 Orientating object holder, with fine adjustment screws, factory fitted.
50657 Orientating object holder, without fine adjustment screws, factory fitted.
51637 Quick release hardboard holder, without orientation, for 5040-02.
51637-1 Quick release hardboard holder, with orientation, for 5040-01.
50533 Quick release wax cassette holder, without orientation, for 5040-02.
50209 Triangular glass knife holder, fixed.
50681 Triangular glass knife holder, orientating. These accept 25mm high Latta-Hartmann knives with edges up to 15mm.
52985 CO
2
(gas) object holder and knife freezer.
50208 Sloped (20º) knife holder.
50213 Ralph knife holder.
50214 Ralph knife holder with section float-out trough. For long edged glass knives with edges up to 38mm.
52987 Illuminated magnifier.
50230 Standard knife with box, C-profile, 189 x 27 x 10mm. 22º angle, tapped to accept holder for Shandon knife
sharpener, safety cut-outs at each end.
50724 Knife sharpening back for 50230.
50232-1 hardened steel knife with box, C-profile, 160 x 35 x 9mm. 15º angle, suitable for large area sections.
50210 Knife sharpening back for 50232-1.
50207 Steel knife with box, C-profile, 160 x 32 x 13mm. 23º.
50211 Knife sharpening back for 50207.
51675 Handle for 50230, 50232-1 and 50207.
50234 Tungsten carbide tipped knife with box, 228 x 38 x 6mm. Suitable for cutting bone and hard plastics. NB: needs to be
resharpened at our factory.
52647 Stem for 50232-1 and 50234 knives.
52671 Knife sharpening kit. Includes hone, strop, oil, three grades of abrasive and instructions.
57612 Coarse abrasive, 6g net.
57611 Fine abrasive, 6g net.
57610 Honing compound, 6g net.
50239 Clock oil, 6g net.
50140 ‘Magnacut’ disposable blade system. Consists of magnetic blade holder, 50mm anti-roll plate, 10 blades, blade removal
tool, micro-adjusting T-piece and stem, box and instructions.
50133 ‘Magnacut’ disposable blade system. Consists of magnetic blade holder, Magnaplate anti-roll plate, 10 blades, blade
removal tool, box and instructions.
50540 ‘Magnacut’ disposable blade holder only.
52727 Long-life disposable blades for Magnacut, C-profile, pack of 50.
51564 ‘Magnacut’ blade removing tool.
50240 Feather blade holder with box.
50241 Feather disposable blades, pack of 50.
A KNIFE SHARPENING SERVICE IS AVAILABLE - DETAILS ON REQUEST
50260 5 - 300µm feed screw.
50259 3 - 180µm feed screw.
50258 2 - 120µm feed screw.
50257 1 - 60µm feed screw.
50255 0.5 - 30µm feed screw.
50256 0.2 - 12µm feed screw.
50259-1 3 - 180µm feed screw for /Ma/r option.
50258-1 2 - 120µm feed screw for /Ma/r option.
50257-1 1 - 60µm feed screw for /Ma/r option.
50255-1 0.5 - 30µm feed screw for Ma/r option.
50256-1 0.2 - 12µm feed screw for /Ma/r option.
50734-1 Object holder, 22mm diameter, solid.
50734-2 Object holder, 22mm diameter, solid - as 50734-1 but long type.
50735-1 Object holder, 37mm diameter, solid
50735-2 Object holder, 37mm diameter, solid - as 50735-1 but long type.
50744 Object holder, 5mm diameter, solid.
50721 Object holder, 50mm diameter.
50741 Object holder, 50 x 50mm.
50743 Object holder, 50 x 70mm.
50221 Quick release object holder clamp, complete with 50 metal object discs.
50690 Metal object holder discs, 22mm, pack of 50.
50204 Cork object holder discs, 22mm, pack of 50.
50204-1 Cork object holder discs, 50 x 50mm, pack of 50.
50162 Adaptor, to accept Ames cryostat, saddle type object holders.
52658 Vertical vice clamp.
57713-1 Bright Cryospray 134, 300ml aerosol can.
57713 Bright Cryospray 134, 300ml aerosol can, carton of 12 cans.
54791 Low temperature oil, 200ml bottle.
54791-1 Low temperature oil, 4.54 litre drum.
57344 Knife cleaning brush.
57808 Anti static brush, 12mm.
52531 Wax brush and debris tray.
53573 Spare fuse set for 5040-001 or 5040-002 with 225MR.
53574 Spare fuse set for 5040-001 or 5040-002 with 226MR.
To Next Page
Loading...
