Revised May 2012
2
INSTRUCTION MANUAL
1
SAFETY INFORMATION 3
Consumer Protection 3
Please Take Note Of The Following Warnings: 3
ELECTRICAL 3
OPERATION 4
ACCESSORIES 4
PRODUCT SAFETY SUGGESTIONS 4
DECONTAMINATION CERTIFICATES 4
IMPORTANT 4
WARRANTY 5
Optional Feedscrews 5040 7
1.2.3 QUICK RELEASE FEATHER BLADE HOLDER BLOCK 8
1.2.4 KNIFE CARRIAGE FEED CONTROL 8
1.2.4a FINE TRIM ADJUSTER / FTA (if fitted) 8
1.2.5 BLADE ANGLE 8
1.2.6 BLADE LOADING 8
1.2.7 SPECIMEN HOLDERS 8
1.2.8 SPECIMEN ORIENTATION (where fitted) 9
1.2.9 ADVANCE / REWIND CONTROL 9
1.2.10a LEFT HAND SIDE ADVANCE/REWIND CONTROL - /LHS (where fitted) 9
MOTOR DRIVE (where fitted) 9
FOOT SWITCH (where fitted) 10
1.2.11 SECTION COUNTER (where fitted) 10
1.2.12 MOTORISED ADVANCE / REWIND (where fitted) 10
1.2.13 OTHER ACCESSORIES 10
2. OPERATION 11
2.1 FITTING THE SPECIMEN 11
2.2 TRIMMING THE SPECIMEN 11
2.3 SECTION CUTTING AND COLLECTION 11
2.4 HINTS ON SECTIONING 11
3.1 DAILY CARE 12
3.2 MAINTENANCE & SERVICING 12
3.3 DECONTAMINATION 12
4. SPECIFICATION 12
ORDERING INFORMATION 14
OPTIONAL FEATURES 14
5. SPARE PARTS AND ACCESSORIES 15
5.2 5040 Electronics Spares List 17
5.3 Accessories and Consumables 18
A KNIFE SHARPENING SERVICE IS AVAILABLE - DETAILS ON REQUEST 18
MATERIAL SAFETY DATA SHEET 19
Name: CRYO-M-BED 19
MATERIAL SAFETY DATA SHEET 20
Name: CRYOSPRAY 20
MATERIAL SAFETY DATA SHEET 21
Name: LOW TEMPERATURE OIL 21
WARNINGS: Low Temperature 26
Knives / Blades 27
DECONTAMINATION CERTIFICATE 28
DECONTAMINATION PROCEDURES 29
QUALITY SURVEY REPORT 30
To Next Page
Loading...
