Brighter Eye 360 Led - Maintenance and Cleaning

10
10. Maintenance and Cleaning
To prolong a Projector’s life, regular maintenance should be done for its LED optical system, to
ensure that the system is in its best operational condition. If the projector does not work properly,
check the fuses on the power socket of the projector, if it is burned, they should only be replaced
by fuses of the same specification. Should these be damaged, call a qualified technician before
replacement. The projector has thermal protection device that will switch off the projector in case
of overheating. Should this occur, check if the fans work normally or fan and fan shield are blocked
by dust.
Any maintenance work should only be carried out by qualified technicians.
25 Mode chanel Function Instruction
1
Pan 0-255
2
Tilt 0-255
3
Pan Fine 0-255 (16 bit)
4
Tilt Fine 0-255 (16 bit)
5
Motor Speed 0-255 From fast to slow
6
Dimmer 0-255 (0-100% dimming)
7
Shutter 0-255 Strobe Slow to fast (0 is open)
8
Red 0-255 (linear) Ring 1
9
Green 0-255 (linear) Ring 1
10
Blue 0-255 (linear) Ring 1
11
White 0-255 (linear) Ring 1
12
Red 0-255 (linear) Ring 2
13
Green 0-255 (linear) Ring 2
14
Blue 0-255 (linear) Ring 2
15
White 0-255 (linear) Ring 2
16
Red 0-255 (linear) Ring 3
17
Green 0-255 (linear) Ring 3
18
Blue 0-255 (linear) Ring 3
19
White 0-255 (linear) Ring 3
20 Chose Color 0-255 (build in color makro)
21 Makro
0-10 No Makro
10< Makro ON
22
Makro Speed 0-255 From slow to fast
23
Zoom 0-255 Zoom range
24 XY Motor
0-64: no effect
64-128: X motor reverse
129-192: Y motor reverse
193-255: XY motor reverse
225 Reset
0-64: No effect
65-128: Auto mode
129-192: Sound mode
193-255: Reset