4
2. Installation
Take 1 hook and 1 safety cord out from the package and x the hook on the chassis, and fasten the
hook with the chassis to the underside of fixture with 2 screws, Hang the fixture on the structure
and fasten the screws attached to the hook. (See the WARNING on the underside of the base as
shown above) Always ensure that the projector is firmly anchored to avoid vibration and slipping
whilst functioning. Always ensure that the structure, that you are going to mount the projector on,
is secure and is strong enough to support a weight of each projector.
WARNING:
The projector MUST be lifted or carried by the HANDLES instead of clamps.
For safety the safety cord should afford 10 times of the unit’s weight.
To Next Page
Loading...