Brighter Smart 1000 - Maintenance and Cleaning

19
200-207
Macro 10
208-215
Macro 11
216-223
Macro 12
224-231
Macro 13
232-239
Macro 14
240-247
Macro 15
248-255
Macro 16
CH15
Prism
rotation
0
No rotation
1-127
Forwards prism rotation from fast to slow
128-129
no rotation
130-255
Backwards prism rotation from slow to fast
CH16
Frost
0
Open
1-179
Frost from 0%to 100 %
180-189
100% frost
190-211
Pulse closing from slow to fast
212-233
Pulse opening from fast to slow
234-255
Ramping from fast to slow
CH17
zoom
0-255
Zoom from max. to min.beam angle
CH18
zoom fine
0-255
Fine Zoom
CH19
focus
0-255
Continuous adjustment from far to near
CH20
focus fione
0-255
Fine Focus
CH21
empty
empty
CH23
dimmer
0-255
Dimmer intesity from 0% to 100%
Ch24
Dimmer fine
0-255
Fine dimming
10. Maintenance and Cleaning
The following points have to be considered during the inspection:
 All screws for installing the devices or parts of the device have to be tightly connected and must
not be corroded.
 There must not be any deformations on the housing, color lenses, fixations and installation
spots (ceiling, suspension, trussing).
 Mechanically moved parts must not show any traces of wearing and must not rotate with
unbalances.
 The electric power supply cables must not show any damage, material fatigue or sediments.
Further instructions depending on the installation spot and usage have to be adhered by a
skilled installer and any safety problems have to be removed.
In order to make the lights in good condition and extend the life time, we suggest a regular
cleaning to the lights.