Step 3 – Install Battery Pack
Take the silicon strap and loop one of the end holes over the T-hook on the side of the battery pack.
Place the battery pack against the frame of the bike, pull the silicon strap around the frame, and
secure it on the other T-hook.
Warning: Do not mount the battery pack near or on moving parts, or where it has the potential to
interfere with moving parts.
Step 4 – Install Lights
Wrap the lights around the parts of the frame you wish to light up.
Warning: Do not string lights on or in proximity of moving parts. Do not mount in any area that would
prevent turning, like the handlebars.
Step 5 – Secure Lights
Secure the end of the light string with the included wire tie, with one LED light placed after the wire
tie.
Brightz, Ltd.
8000 Yankee Road, Suite 225, Ottawa Lake, MI 49267
Email: info@brightz-ltd.com
Visit us at www.brightz-ltd.com for more fun products!
To Previous Page
Loading...
