Brightz Cosmic User Manual

Cosmic Brightz
™
Instructions
© Copyright Brightz, Ltd. 2018
All rights reserved
Step 1 – Install Batteries
Open latches on the side of the battery pack to access batteries. Install 3 fresh AA batteries,
observing correct polarity (+/-). Close the battery pack, making sure the latches snap shut.
Do not mix old and new batteries and do not mix alkaline, standard (carbon-zinc) or rechargeable
(nicad, ni-mh, etc.) batteries.
Caution: Batteries may explode or leak, and cause burn injury if recharged, disposed of in fire,
mixed with a different battery type, or inserted backwards. Replace all used batteries at the same
time. Clean battery contacts and contacts on the device prior to installing. Remove batteries if item
will not be used for long periods of time. When battery expires remove promptly.
Step 2 – Select a Location
Choose a location to mount the battery pack, away from moving parts.
Latches

Brightz Cosmic Specifications

General

Brand	Brightz
Model	Cosmic
Category	Bicycle Accessories
Language	English

Summary

Product Installation

Step 1 - Install Batteries

Install 3 fresh AA batteries observing correct polarity and follow safety guidelines for battery usage and disposal.

Step 2 – Select a Location

Choose a suitable mounting location on the bicycle frame, ensuring it is away from moving parts.

Step 3 – Install Battery Pack

Secure the battery pack to the bike frame using the silicon strap, avoiding moving parts.

Step 4 – Install Lights

Wrap lights around the bike frame, avoiding moving parts and steering areas like handlebars.

Step 5 – Secure Lights

Use the included wire tie to securely fasten the end of the light string.