Brildor Combo Craft Express - Pen Heater Guide; Installing the Pen Heater; How to Print a Pen

To Next Page

To Previous Page

19 20

Combo Heat Press MachineCombo Heat Press Machine

HOW TO PRINT A PEN?

1 Fix the image on the pen with

heat-resistant tape;

4 Turn on the machine;2 Put the pen on the machine,

lined up neatly with the print

side facing up;

As the machine heats up

to the set temperature,

press down the handle, and

the machine will start the

countdown automatically;

5 Set the printing time and

temperature;

7 After the countdown, lift up

the handle;

3 Adjust the printing pressure;

8 Check the amazing printout

result!

HOW TO INSTALL THE PEN HEATER ？

Secure the pen heater with screws;

4 Plug in the connect cable;5

Secure the bottom with screws;3

6 The installation is complete!

1 Turn off the machine; 2 Remove the heating platen;

brildor.com