17 18
Combo Heat Press MachineCombo Heat Press Machine
HOW TO PRINT A CAP?
1 Fix the image on the cap with
heat-resistant tape;
4 Turn on the machine;2 Place the cap on the pad
and secure the cap with the
holding device；
6
As the machine heats up to the
set temperature, press down
the handle, and the machine
will start the countdown
automatically;
5
Set the printing time and
temperature;
7
After the countdown, lift up
the handle;
3 Adjust the printing pressure;
8
Check the amazing printout
result!
HOW TO INSTALL THE CAP HEATER?
Secure the cap heater with screws;4 Plug in the connect cable;5
Secure the bottom with screws;3
6 The installation is complete!
1 Turn off the machine; 2 Remove the heating platen;
brildor.com
To Next Page
Loading...