21 22
Combo Heat Press MachineCombo Heat Press Machine
PRINTING PARAMETERS
Product
Product
Name
T-shirt Pillow Cover Photo Slate MDF Plaque Glass Cutting Board
Aluminium
Ornament
Temperature 374 ℉ 374 ℉ 374 ℉ 356 ℉ 356 ℉ 356 ℉
Time 60 s 60 s 600 s 150 s 300 s 50 s
Product
Product
Name
Shopping Bag Pen Hip Flask Plate Cap
Stainless Steel
Tumbler
Temperature 374 ℉ 428 ℉ 356 ℉ 356 ℉ 356 ℉ 356 ℉
Time 60 s 420 s 60 s 220 s 80 s 60 s
1. All the data above are our Combo Heat Press
only.
2.
All the data above are based on the test results
of our sublimation blanks and for reference
only. Please test your own products and find
the proper parameters.
Note Safety Instructions
1.
Don’t touch the heating platen and the silicone pad
when the machine is heating up or is still very hot.
2.
This machine is not intended for use by children.
FAQS:
Colors are lighter The temperature is too low, the pressure is uneven, or the time is too short.
Printed picture is vague The printing time is long, which causes the ink spread.
Colors are less bright The pressure is too high or the temperature is too high.
Printed picture is partially vague The heat is uneven.
Colors are different The pressure is uneven or the surface of the printed item is uneven.
The paper sticks on the printed item The temperature is too high or the coating of the item is in poor quality.
brildor.com
To Previous Page
Loading...