Brildor Combo Craft Express - Mug;Tumbler Attachment Guide; Installing the Mug;Tumbler Attachment; How to Print a Tumbler

11 12
Combo Heat Press MachineCombo Heat Press Machine
HOW TO PRINT A TUMBLER?
1
5
2
6
3
7
4
8
Fix the image on the tumbler
with heat-resistant tape;
Set the printing time and
temperature;
Adjust the printing pressure;
Press down the handle, and
the machine will start the
countdown automatically;
As the machine heats up to
the set temperature, put the
tumbler into the attachment;
After the countdown, lift up
the handle;
Turn on the machine;
Check the amazing printout
result!
1 Turn off the machine;
HOW TO INSTALL THE MUG/TUMBLER PRESS ATTACHMENT?
2 Slide out the drawer for convenient
operation;
3 Unplug the connect cable connected to
the heating platen ;
5 The installation is complete!4 Plug in the connect cable connected to
the mug/tumbler heat press;
brildor.com