Brildor Combo Craft Express - Plate Heater Guide; Installing the Plate Heater; How to Print a Plate

13 14
Combo Heat Press MachineCombo Heat Press Machine
HOW TO INSTALL THE PLATE HEATER? HOW TO PRINT A PLATE?
1
5
2
6
3
7
4
8
Fix the image on the plate with
heat-resistant tape;
Set the printing time and
temperature;
Adjust the printing pressure;
Press down the handle, and
the machine will start the
countdown automatically;
As the machine heats up to the
set temperature, put the plate
on the attachment;
After the countdown, lift up
the handle;
Turn on the machine;
Check the amazing printout
result!
Remove the heating platen and install the
plate heater;
4 Secure the plate heater with screws;5
Remove the screws from the heating
platen;
3
6 Plug in the connect cable, and the
installation is complete!
1 Turn off the machine; 2 Unplug the connect cable
connected to the heating platen;
brildor.com