EQUIPMENT NECESSARY
Find here explained the equipment required to apply this technique. Our pack includes
everything apart from the press.
1
Use and installation of Acrorip is explained below.
2
Find a wide range of heat presses on our online store: http://bit.ly/3cBvKrC
PRINTER
PET FILM
DTF INKS
RIP SOFTWARE
1
DTF POWDER
HEAT PRESS
A regular printer, modied in
order to print with DTF inks
A support capable of carrying
the wet and apply the powder
afterwards
Similar to high-elasticity textile
inks but more diluted
The software necessary for
accurate prints
An adhesive powder required
to stick the inks to the fabric
after a curing process
A heat press is necessary to
cure the powder and to apply
the transfer
3
www.brildor.com/en/
To Next Page
Loading...