Brilix XHPFD 80 E User Manual

INVERTER
SWIMMING POOL HEAT PUMP
USER MANUAL
Illustrative photo
i
Read the instructions
EN
VERZE 8. 6. 2017 / REVIZE: 3. 11. 2017

Brilix XHPFD 80 E Specifications

General

Brand	Brilix
Model	XHPFD 80 E
Category	Heat Pump
Language	English

Summary

Safety and Operational Notes

ATTENTION: Manual Information

This section highlights the manual's comprehensive coverage for heat pump use and installation.

WARNING: Winter Drainage Procedure

Essential safety warning regarding emptying the heat pump to prevent freezing damage and warranty loss.

WARNING: Electrical Safety Precautions

Crucial safety advice to cut power before accessing the heat pump's internal high-voltage components.

WARNING: Display Controller Protection

Guidance on protecting the display controller from humidity damage by keeping it dry or covered.

Specification

Dimension

Installation

Installation Factors

Key factors for optimal performance: good ventilation, stable power supply, and a recycled water system.

Installation Diagrams and Notes

Illustrations and important notes on system installation, including bypass and chemical placement.

Adjusting the Bypass

Initial Operation

Water Flow Switch

Explanation of the flow switch function for protecting the heat pump unit with adequate water flow.

Time Delay

Details on the built-in 3-minute start-up delay to protect circuitry and avoid contact wear.

Condensation

Information on condensation formation on evaporator fins due to cooling, often mistaken for leaks.

Pressure Gauge Display (R410A)

Guide to interpreting the refrigerant gas pressure gauge (R410A) under different operating conditions.

Controller Operation

Controller Buttons and Symbols

Overview of controller buttons, symbols, and their functions for operating the heat pump unit.

Parameter Settings

Instructions for checking and adjusting user parameters (d0-d11, P1-P7) on the controller.

Operating Modes and Reset

Explanation of operating modes (Powerful, Smart, Silent) and the system reset function.

Operation Logic

Heating Operation Logic

Details the operational logic for the heat pump during heating cycles based on working status and temperature.

Cooling Operation Logic

Details the operational logic for the heat pump during cooling cycles based on working status and temperature.

Malfunction and Trouble Shooting

Error Code Display

Table of error codes displayed on the LED wire controller, their reasons, and troubleshooting solutions.

Other Malfunctions

Troubleshooting guide for other malfunctions, including heat pump not running and water stains.

Electrical Wiring

Electrical Connection and Disconnect

Guidance on electrical connection, earthing, bonding, and proper unit disconnection for servicing.

Maintenance

Exploded View