Need help?Do you have a question about the Brilix XHPFDPLUS140 and is the answer not in the manual?
Technical specifications for horizontal EU design models using R32 refrigerant.
Technical specifications for horizontal EU design models using R410A refrigerant.
Diagram showing the typical installation layout of the heat pump and related water system components.
Detailed instructions and requirements for installing the heat pump unit, including clearances and positioning.
Instructions on the proper placement of chlorinators or brominators relative to the heat pump.
Step-by-step guide for the initial startup process after the heat pump has been installed.
Explanation of the water flow switch function and the built-in time delay for restart protection.
Important notes regarding the proper electrical connection and safety requirements for the heat pump.
Details the functions of the LED wire controller, including display, buttons, and modes.
Explains how to view and adjust various operating parameters of the heat pump.
Provides guidance on how to check the current operational status and various temperatures displayed.
Guides on setting water temperature, locking parameters, and configuring timer functions.
To Next Page
General
