5
Note: Make sure all control
knobs are in the off
position, LP tank valve is
closed and tank is
disconnected from
regulator and removed
from grill.
Step 1
Using an adjustable wrench to hold
the gas manifold connection secure,
use a 3/4” wrench to loosen the
hose connection nut. Replace
existing LP hose/regulator assembly
with natural gas 10ʼ hose assembly.
Tighten the connection carefully using
two wrenches.
Step 2
Remove two screws from side
burner bracket. Carefully lift side
burner up and away from valve
nozzle. Set aside for later use.
Step 3
Open hood and remove warming
rack, cooking grills and heat
distribution plates. Set aside for later
use.
810-8502-S MAIN & SIDE BURNERS
Gas Manifold Nut
Cooking Grills
Heat
Distribution
plates
10ʼ Natural Gas Hose
Warming Rack
CONVERSION
INSTRUCTIONS
810-8502-F
To Next Page
Loading...
