8
810-8502-S SEAR BURNER
Note: It is helpful to keep the screws
with the components as they are
removed for ease of reassembly.
Step 1
Remove the two pre-attached bolts from
the sear burner orifice bracket using a
screwdriver. Set aside for later use.
Remove the LP orifice using the orifice
tool provided.
Note: Bending the hose could damage
the supply line.
Step 2
Attach the sear burner orifice bracket
using the two pre-attached bolts set aside
in Step 1.
Note: Follow directions in the leak
testing section of this manual
before using this grill.
Orifice Bracket
To Next Page
Loading...
