Brinno MAC200 DN - Setting Date and Time

MAC200 DN
10
720P
OK
3
1. To turn on the camera as a Motion Activated Camera,
press to go to MENU setting, select Set Date &
Time, and press .
2. The number with the red background is the number
you are setting. Press for a lower number or
for a higher number. Press : Next to conrm
and go to the next number.
3. When nished press to exit and return to the Set
Up Screen.
4. ST: Standard Time
DT: Daylight Saving Time
2014/08/11
ST 23:59:35
2014/08/11
ST 23:59:35
OK
:
NEXT
Date & Time
Date & Time
2
Initial Step-3
MENU 12/14
Set Date
& Time
1
OK