Brinsea ChickSafe Door - User Manual

1
ChickSafe Door Installation Instructions
 Important! If using this door in conjunction with a ChickSafe Door Opener, be sure to
fully install the door and the opener BEFORE installing batteries. Failure to observe this
may cause incorrect operation and possible damage. Please fully read the instructions
supplied with the ChickSafe Opener.
Please read these instructions carefully to achieve best results and keep these instructions safe for future
reference.
To register your new Brinsea product and qualify for your free 3 year warranty please visit www.brinsea.com within
30 days of purchase and follow the link on the Brinsea home page. The serial number may be found on the outside
of the box. Sign up for the Brinsea newsletter to receive the latest news and information.
 Check the sliding door to make sure it runs smoothly and reliably both upwards and downwards.
ChickSafe and other door openers use gravity alone to close the door.
 For helpful information see our ChickSafe ‘Frequently Asked Questions’ page at www.brinsea.com
Pack Contents:
CS005 US Issue 01
(a) x1
(b) x2
(c) x2
(d) x2
(e) x6
(f) x2
x2
x1
x1
Tools needed for installation:
- Screwdriver (cross head PZ1)
- Drill with 1/16” (1.5mm) diameter drill bit, or bradawl
- Tape measure
- 5.5mm wrench or pliers

Summary

ChickSafe Door Installation Instructions

Important Safety and Pre-installation Notes

Ensure full installation of door and opener before installing batteries to prevent damage.

Door Panel and Channel Preparation

Peel protective film, fit grommets, screws, and rivets to door panels and channels.

Mounting Channels to Hen House

Position channels vertically and drill fixing holes for secure mounting.

Door Assembly and Operational Testing

Slide door panels into channels and test for smooth operation and correct sliding.

Brinsea ChickSafe Door Specifications

General

Brand	Brinsea
Model	ChickSafe Door
Category	Security Sensors
Language	English