What to do if there is no water flow in my Bristan Bathroom Fixtures?
If there's no water flow (either hot or cold) in your Bristan Bathroom Fixtures, start by checking if the isolating valves are turned on. Also, ensure that the cold-water storage tank hasn't run dry.
Why is my Bristan Bathroom Fixture performance poor?
If you're experiencing poor performance with your Bristan Bathroom Fixtures, several factors could be the cause. First, ensure that both the hot and cold isolating valves are fully open to eliminate any restrictions in the water supply. If the unit seems to be overheating, allow it to cool down, as it will automatically reset. Also, verify that the unit has adequate ventilation to prevent overheating. Finally, inspect the handset or shower hose for any blockages and clean them if necessary.
Details on how to install the shower unit with recessed pipework.
Procedure for marking the wall for riser rail bracket placement.
Steps for inserting, securing, and fitting the riser rail to the wall.
Connecting the shower hose to the unit and showerhead.
Information regarding the policy for replacement parts.
General| Brand | Bristan |
|---|---|
| Model | 1500 |
| Category | Bathroom Fixtures |
| Language | English |
To Next Page
