Congratulations on purchasing Bristan Bathroom Accessories. You are now the owner of a
high quality product, manufactured to exacting standards. Fitting your accessories is easy
when you follow these instructions. Please identify all components and check for
completeness, particularly before arranging fitting.
Installation.
1. To assemble towel stacker, fit the horizontal rails (2) to the vertical rails (1) & secure with
screws (3). Fit wall brackets (4) to the ends of the vertical rails.
2. Establish the position for the towel stacker & mark out the fixing holes using the
assembled product, ensuring the towel stacker is level.
1. Prior to drilling into walls, check there are no hidden electrical wires,
2. cables or water supply pipes, with the aid of an electronic detector. If
3. you use power tools Do Not Forget:
. Wear eye protection
. Unplug equipment after use
1. Drill holes to suit, use walls plugs supplied if required.
2. Screw towel stacker to the wall using the fixing screws (5) supplied.
3. See over the page for aftercare instructions.
1
To Next Page
Loading...
