Do you have a question about the Bristan Nero Series and is the answer not in the manual?
Brand | Bristan |
---|---|
Model | Nero Series |
Category | Kitchen & Bath Fixtures |
Language | English |
Connect hot/cold supplies, turn on water, open outlets, and check for leaks.
Install mixer, secure with fixing kit, washers, and nuts. Fit flexi tails by hand.
Fit pop-up waste with sealant, adjust waste rod, and set friction for waste mechanism.
Fittings must meet Water Supply (Water Fittings) Regulations 1999 and Scottish Byelaws 2004.
Tap assemblies with Type AUK3 air gap are for installation to protect against Fluid Category 5 backflow risk.
Ensure outlet discharges above spill-over level as per tables for backflow protection.