EasyManua.ls Logo

Brita Tap - Activating and Using the Status Indicator

Brita Tap
120 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ENGLISH 11
5 Activating the BRITA Tap Cartridge Status
Indicator
A Push the Reset Button (see fig. 5) of the BRITA Tap Cartridge Sta-
tus Indicator for three seconds until the LED-light flashes green.
B The timer starts automatically.
6 Maintenance
Regularly check the filter system for leaks. Regularly check the
hoses for kinks. Kinked hoses must be replaced.
!
Prior to exchanging the filter system, read the Technical
Data (chapter 7) and Important Notes (chapter 9).
Regularly clean the outside of the filter system with a soft, damp
cloth.
!
Do not use any abrasive chemicals, cleaning solutions or
astringent cleaning agents.
7 Technical data of the P 1000 and P 3000 cartridge
Operating pressure 2 bar to max. 8.6 bar
Water intake temperature 4°C to 30°C
Ambient tem-
perature for
operation 4°C to 40°C
storage/transport –20°C to 50°C
Capacity up to carbonate hard-
ness 10 °dH at setting A
P1000 1200 L
P3000 3400 L
Capacity from carbonate hard-
ness 10 to 17 °dH at setting
“B”
P1000 600 L
P3000 1700 L
Capacity from carbonate hard-
ness 17 to 24 °dH at setting
“C”
P1000 400 L
P3000 1100 L
Pressure loss by nominal service flow 0.25 bar
Weight (dry/wet)
P1000 1.0 kg/1.6 kg
P3000 1.8 kg/2.8 kg
Dimensions
(Width/Depth/
Height)
Filter
system
(filter head
with filter
cartridge)
P1000 119 mm/108 mm/265 mm
P3000 117 mm/104 mm/417 mm
Filter
cartridge
P1000 108 mm/108 mm/259 mm
P3000 104 mm /104 mm/410 mm
Installed
dimensions
(vertical
installation
with wall
mounting
bracket)
P1000 137 mm/130 mm/265 mm
P3000 137 mm/128 mm/417 mm
Operating position Horizontal and vertical
Water inlet connection G3/8"
Water outlet connection G3/8"
Technical data of the BRITA Tap
Operating pressure 0.5 bar to max. 10 bar
cold water connection 4°C to 30°C
warm water connection max. 70°C
flow rate ≥ 9 L/min
acoustics rating Group II/-
Weight
Dimensions (Width/
Depth/Height)
Aerator
WD 3020 2,07 kg
17,3 cm x 28,4 cm x
29,4 cm
M24x1
WD 3030 2,12 kg
17,2 cm x 20,5 cm x
36,3 cm
M22x1
WD 3040 2,16 kg
17,2 cm x 23,7 cm x
34,8 cm
M22x1
WD 3050 2,12 kg
17,2 cm x 20,5 cm x
36,2 cm
M22x1
1014662-002_GA_BRITA_Tap_CE.indb 11 04.04.16 11:27

Related product manuals