Brita Tap - Page 9

ENGLISH 9
(fig. 9)
Hot water
supply
Cold water
supply
!
The max. tightening torque for the G3/8" connections may
not exceed 14 Nm! Only hose connections with gaskets
(13) may be used – hoses with conical screw connections
damage the connections of the filter head and invalidate any
warranty claims!
3.5 Step 5: Inserting the filter cartridge (see fig. 10)
A Remove protective strap (1).
B Insert the filter cartridge (4) vertically into the filter head (5).
C Turn the locking handle (3) until you feel it engages.
(fig. 10)
A.
B.
3.
2.
1.
4.
5.
!
The filter cartridge can only be inserted when the locking
handle is open.
Make sure that the filter cartridge is positioned correctly.
1014662-002_GA_BRITA_Tap_CE.indb 9 04.04.16 11:27