Britax ADVOCATE - Adjusting the Harness Length; Adjusting the Harness Height; Child Seat Functions

22
Britax Child Safety, Inc.
Adjusting the Harness Height
• In rear-facing mode, the harness straps should be in
the closest position at or below your child’s shoulders.
See page 7.
• In forward-facing mode, the harness straps should
be in the closest position at or above your child’s
shoulders. See page 7.
1. Loosen the harness.
a. Push harness
release button.
b. Pull both harness
straps forward.
2. Squeeze the harness
height adjuster, slide the
harness into the desired
position and release.
3. Ensure the harness has
locked into position.
1b
1a
Child Seat Functions
Adjusting the Harness Length
IMPORTANT: Adjust the harness to the shortened length
if a snug harness cannot be achieved with a small infant
(approx. 10 lbs [4.5 kg] and under).
Shortening the Harness
1. Open the CLICKTIGHT.
a. Press the dimple on
the CLICKTIGHT
dial.
b. Rotate dial clockwise
until CLICKTIGHT
releases and lift to
open.
2. Disconnect the end of
one harness from the
anchor.
1b
1a