38
Britax Child Safety, Inc.
Harness Buckle
IMPORTANT: If your child eats and drinks while in the
child seat, you will need to check the buckle periodically
and rinse out any accumulated debris (see page 41).
Removing the Harness Buckle
1. Unbuckle the harness and
open the CLICKTIGHT.
2. Lift the front of the seat
cover and pull over the
CLICKTIGHT bezel to
access the buckle strap
connection.
3. Remove the
harness buckle by
turning the buckle
strap sideways and
routing the retainer
out of the front
buckle slot in the
child seat.
6. Replace the head
restraint.
a. Raise the harness to
the highest position.
b. Reattach the elastic
straps to the rear of
the head restraint.
c. Reattach the hook and
loop fasteners on the
head restraint around
the harness.
7. Replace the comfort
pads.
6b
6c
To Next Page
Loading...
