Britax Brook - Stroller Disassembly; Removing the Cup Holder; Removing the Snack Tray

11
Installing the Cup Holder
1. Push the cup holder bracket
onto the holding pin located
on the left side of the stroller
handle.
1
Removing the Snack Tray
1. Press the buttons underneath
the snack tray at the same time.
NOTE: Make sure to empty the
snack tray.
2. Pull the snack tray away from
the stroller.
1
2
1
Stroller Disassembly
Removing the Cup Holder
1. Pull the cup holder off the
holding pin.