Britax Brook - Infant Car Seat Mode; Using a Compatible Britax Infant Car Seat

21
Attaching the Infant Car Seat
1. Press both brake pedals down to
lock the parking brake.
NOTE: After setting the brake,
check that the brake is set
properly by attempting to roll the
stroller forward and backward. If
the stroller will not roll, the brake is
set properly.
2. Remove the toddler seat.
3. Align the car seat receivers with
the stroller adapters and push
onto the frame until a click is
heard.
NOTE: Seat attaches forward or
rear-facing.
IMPORTANT: Not all infant car seats are compatible with the Brook
stroller. For infant car seat compatibility refer to us.britax.com/
support/frequently-asked-questions.
IMPORTANT: Always secure child in car seat harness when infant
car seat is in use with the stroller.
IMPORTANT: Use only with an infant car seat until child has
sufcient head and neck control.
Infant Car Seat Mode
Using a Compatible Britax Infant Car Seat
1
3